Seeed 썸네일형 리스트형 Grove – Servo Grove - Servo Servo is absolutely a fun motion control device to play! Via a servo library built in Arduino IDE, you can locate it at any position between 0 to 180 degrees. With 4 shafts in different shapes coming, this servo is ready to drive a little fan, lift an object, or mimic a clock hand. Hardware Required - Intel® Edison for Arduino- Grove Base Shield v2- Grove Servo- Grove Rotary Angle .. 더보기 Grove – Rotary Angle Sensor Grove - Rotary Angle SensorThe rotary angle sensor produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a “potentiometer ”. Hardware Required - Intel® Edison for Arduino- Grove Base Shiel.. 더보기 Grove - Sound Sensor Grove - Sound Sensor Grove - Sound Sensor can detect the sound strength of the environment. The main component of the module is a simple microphone, which is based on the LM358 amplifier and an electret microphone. This module's output is analog and can be easily sampled and tested by a Seeeduino. Hardware Required - Intel® Edison Module- Arduino* expansion board- Grove Base Shield v2- Grove Sou.. 더보기 Grove - Buzzer Grove - Buzzer The Grove - Buzzer module has a piezo buzzer as the main component. The piezo can be connected to digital outputs, and will emit a tone when the output is HIGH. Alternatively, it can be connected to an analog pulse-width modulation output to generate various tones and effects. Hardware Required - Intel® Edison Module- Arduino* expansion board- Grove Base Shield v2- Grove Buzzer Ci.. 더보기 이전 1 다음
